Kingston Ssd Acronis

Posted on  by admin

Acronis True Image: clone to SSD

The complimentary Acronis cloning software is not shipped with the Kingston A400 SSD. I contacted Kingston and they replied: Please be advised that the A400 does not come with a licence for the cloning software Acronis True Image. Solid State Drives (SSDs) for Laptops, Desktop PCs, and Servers. From SATA to NVMe, laptop to server, Kingston SSDs provide the speed and reliability you want for the upgrade you need for PC builds, servers, and system builders. Among so many kinds of SSDs, Kingston SSD is a famous brand. Thus, in order to get a better computer performance, to clone disk to Kingston SSD should be chosen, but how to do disk cloning? Usually, you can turn to a piece of cloning software for SSD. The Best Kingston SSD Clone Software.

Kingston Ssd Acronis Review

It is a good idea to clone the current drive to an SSD, whether you want to upgrade to a larger drive or get a better performance. Since Windows doesn’t offer any built-in tools for disk clone, users can only use some third-party programs like Acronis True Image.

Acronis True Image is an integrated application that enables you to clone basic drives (both MBR and GPT) to other drives, even if the target drive is of a different capacity. For Acronis True Image 2017 or earlier, the cloning should be done from Acronis bootable media.

However, since Acronis True Image 2018, you can clone directly without a bootable media. In addition to disk clone, this program also features with disk backup, partition backup, and disk restore, etc. And its latest version is Acronis True Image 2020.

How to use Acronis True Image 2019 to clone to SSD?

Here takes Acronis True Image 2019 clone to SSD for example. Now, you can follow these steps.

Step 1. Connect the SSD to your computer. Make sure it can be detected. Launch this program to click Tools and Clone Disk subsequently.

Step 2. Choose whether to use Automatic (recommended) or Manual transfer mode. Then click Next.

* Automatic: the partitions will be proportionally resized to fit your target drive.

* Manual: change the disk partition layout as you wish.

Step 3. Select the drive that you want to clone. Then click Next.

Step 4. Select the SSD as the destination drive and then click Next.

Step 5. Specify files and folders that you don't want to clone on the What to exclude step.

Step 6. On the Finish step, ensure that the configured settings suit your needs. Then click Proceed.

Step 7. Wait for the process to be completed. Then this program will inform you of the next steps to take.

★Tips:
✍This program cannot be used to clone dynamic disks.
✍Note that the cloned drive will not have a letter within Windows. Once you boot a new device from this drive, a letter will be assigned automatically.
✍Ensure that the target drive has enough capacity to fit the contents of the source drive, when using Acronis True Image clone to smaller SSD.

Although you can use Acronis True Image clone HDD to SSD, you may meet many issues during the operation, such as Acronis True Image will not clone, Acronis True Image cannot find hard drive, Acronis clone disk operation failed and so on. If you want a reliable and flexible tool to clone your hard drive to an SSD, you’d better turn to an Acronis True Image alternative.

Best alternative to Acronis True Image - AOMEI Backupper

AOMEI Backupper Professional is a hard drive cloning software similar to Acronis True Image, but with more features. It allows you to clone basic drives or dynamic drives to internal/external hard drives in a few simple clicks. Its stability enables it to run smoothly on Windows 10/8.1/8/7/Vista/XP. AOMEI Backupper allows you to do the following clone operations:

  • Clone hard drive to larger one (HDD or SSD).

  • Clone HDD to smaller SSD as long as the capacity of the smaller SSD will store all the data from source disk.

  • Clone disk to skip bad sectors with Intelligent Clone Mode (default mode), which means only used sectors on the selected hard drive will be copied to the target drive.

  • Clone disk with bad sectors by Sector by sector clone mode, and all sectors on the source drive will be cloned to the target drive.

  • Migrate Windows 7/8/10 OS to SSD without reinstalling.

Besides, it is capable to improve the working performance of your SSD. Let’s see how it works.

Safely Clone HDD to SSD with Simple Steps

Before you clone:

  • You’d better backup files to external hard drive in advance if you have stored some important files on the SSD. Because the disk cloning process will overwrite the target drive.

  • Connect the SSD with your computer via SATA-to-USB cable or SATA power cable, and make sure it can be detected..

  • Download AOMEI Backupper Professional 30 day trial on your Windows computer and have a shot.

Step 1. Install and launch the disk cloning software - AOMEI Backupper. Select Clone from the left pane. Then click Disk Clone.

Step 2. Select the drive that you wish to clone (here is Disk 0). Then click Next.

Step 3. Select the SSD as the destination drive (Disk 2). Then click Next.

Step 4. Here you can have an Operation Summary. Tick SSD Alignment to accelerate the reading and writing speed of the SSD. Then click Start Clone.

Tips:
Edit partitions: click it to resize partitions on the target drive. Three options are supported: Copy without resizing partitions, Add unused space to all partitions and Manually adjust partition size.
✍Sector by sector clone: as mentioned above, you could clone all the sectors on the source disk whether it is in used, blank, or even bad sectors, will be transferred to the destination.
✍After cloning, the source drive will not be wiped out. You can keep it as a backup or reformat the hard drive for other purposes.

Step 5. Boot from the cloned SSD: Restart your computer and press a certain key (F2, F10, F12, DEL or ESC Key, etc.) to enter BIOS, Then change the boot order inside the BIOS and boot from the cloned SSD.

For laptop or desktop that only one hard drive slot, shutdown your computer and remove the battery, use screwdrivers to replace old hard drive (HDD) with the cloned SSD, then boot the computer up.

Summary

In this article, you have learned how to use Acronis True Image to clone to SSD. However, if you need a more reliable and flexible way to clone your hard drive, AOMEI Backupper Professional could be your best choice. It has simple operation steps and comprehensive features.

AOMEI Backupper not only a disk cloning software but also a powerful Windows backup and restore software, which allows you to backup disk, operating system, partitions to safe location, restore to dissimilar hardware computer, command line utility to clone/backup/restore, delete old backup images, etc. For who is running Windows Server 2003, 2008, 2012, 2016, 2019 (including R2), SBS 2003, 2008, 2011, please try AOMEI Backupper Server to enjoy.

Summary :

Have a need to upgrade hard drive, and backup disk data or system data? Here, you need to use a Kingston SSD utility for disk cloning. In this post, we show you the best Kingston SSD clone software, helping you to clone HDD to SSD so that your computer gets better performance.

Quick Navigation :

Why Clone Disk to Kingston SSD

In order to upgrade disk to a larger one when the hard drive will be running out of space, replace old HDD with SSD for better performance, backup disk data without data loss, or avoid OS installation when having a batch of computers with the same configuration, you may choose to clone the disk.

Before cloning disk, it is essential to prepare a target disk to save this disk copy. SSD has become a popular hard drive due to its advantages, for example, lower power consumption, no noise, fast read-write speed, etc.

Among so many kinds of SSDs, Kingston SSD is a famous brand. Thus, in order to get a better computer performance, to clone disk to Kingston SSD should be chosen, but how to do disk cloning? Usually, you can turn to a piece of cloning software for SSD.

The Best Kingston SSD Clone Software

In the market of clone software for Kingston SSD, the software kinds are various.

Which one should you use?

Here we will recommend you to use two professional Kingston SSD clone tools – MiniTool ShadowMaker and MiniTool Partition Wizard.

MiniTool ShadowMaker

MiniTool ShadowMaker, the professional backup software for Windows 10/8/7, offers you highlighted features helping to back up file/folder, system, partition or disk. Besides, you are allowed to clone a system disk or data disk to another hard drive.

It has a Trial Edition which supports 30-day free trial. Now download this Kingston SSD cloning software. Or you can directly use MiniTool ShadowMaker Pro Edition for a try.

Tip: Some of you may search for Acronis True Image to clone HDD to SSD. Actually, it requires purchase and always fails to work. MiniTool ShadowMaker - Kingston clone software can be an alternative. Refer to this post to learn more: The Best Alternative to Acronis Clone Software.

How to use this clone software for Kingston SSD to clone hard drive to SSD free? Follow the guide below.

Preparatory work

  1. Make sure your SSD has been connected to your computer.
  2. The storage disk space of SSD should be large enough so that all data of the source disk can be transferred.

You had better prepare an empty disk since all the data on the target SSD will be destroyed during the process of disk cloning or OS migration. If there are some important data on SSD, please guarantee that there is a backup to avoid data loss.

Step 1: Launch MiniTool ShadowMaker to its main interface.

Ssd

Step 2: Enter the Tools page, and choose the Clone Disk feature as shown below.

Kingston Ssd Acronis

Step 3: In the pop-up window, enter the corresponding section to choose a source disk and target disk for the disk cloning.

Tip: It is recommended to clone system disk to your Kingston SSD for better performance. So, choose system disk as the source disk and Kingston SSD as the destination disk.

Step 4: See the following screenshot: this Kingston SSD clone software is performing the cloning operation. And you need to wait for a few minutes until it completes.

Step 5: Later, a piece of information will appear, recommending you to disconnect either the original disk or the target disk since Windows operating system may mark one as offline.

If you want to replace your system disk with the Kingston SSD, please shut down your computer, remove the system disk and put the SSD to the original place.

Then, the operating system can boot up quickly. If you clone disk to SSD only for backup, to remove the SSD after the disk cloning is OK.

Interested in this SSD drive clone software Now, get MiniTool ShadowMaker Trial Edition to have a free trial now!

MiniTool Partition Wizard

This partition manager provides you with many powerful features for disk and partition management, such as resize/extend/format/delete/wipe partition, manage dynamic disk, migrate OS to SSD/HD, copy disk, copy partition, recover lost partitions, rebuild MBR, etc.

If you want to clone hard drive to SSD free, it is very easy with the Copy Disk feature of this program.

Due to its rich-featured functions, MiniTool Partition Wizard has earned a great reputation from users in the world. Therefore, for most users, it seems to be the best free cloning software for SSD.

Tip:
• For OS disk, the Free Edition doesn’t allow you to copy disk or migrate OS from MBR to GPT. Fortunately, the Professional or the more advanced edition is available. Learn more edition comparison.
• Before you do, please download the free Kingston HDD to SSD software or purchase its Professional Edition.

Clone Hard Drive to SSD

How do you clone a hard drive with this hard drive cloning software? Actually, it is very easy. Just follow the guidance below.

Step 1: Launch MiniTool Partition Wizard to its main interface. In order to clone data to Kingston SSD with this Kingston SSD clone software, please use Copy Disk feature. There are three ways to activate this function:

  1. Select it from the Wizard menu.
  2. Right-click on the OS disk and select Copy.
  3. Select the disk you want to clone, and then click this feature from Convert Disk.

Here take the first way as an example.

Step 2: After selecting this wizard, you will enter an interface to tell you this feature can create a copy of the hard disk. Then click Next to continue.

Step 3: Then on this page, you can choose a disk you like to copy. (Here choose to clone OS disk.) All partitions from this disk will be copied to the target disk that you will choose on the next page. Click the Next button in the bottom right corner.

Step 4: Next select a disk to copy the source content to. Here we choose SSD. All data from the source disk will be copied to SSD for better performance. You also need to click Next.

Step 5: Then in the pop-up window, two copy options are offered by this HDD to SSD cloning software:

  1. Fit partitions to entire disk: all your partitions will occupy the entire disk space of the SSD proportionally.
  2. Copy partitions without resizing: the partition size of your SSD won’t be changed. (Here we choose this way as an example.)

Recommendations:

  • Here your target disk is SSD, so Align partitions to 1MB option should be chosen since it could improve your computer performance.
  • If you want to migrate disk partitions to a GPT disk with this Kingston SSD clone software, please check Use GUID Partition Table for the target disk.

How to clone MBR to GPT? If you need to clone MBR to GPT disk, MiniTool Partition Wizard is the best choice.

Step 6: Then this Kingston SSD utility will tell you to change BIOS setting and ensure the new disk is the default boot disk. Click Finish to return to the main interface.

Step 7: Then hit Apply to execute this disk cloning operation.

Now with the help of this professional Kingston SSD clone software, you can effectively finish data migration from HDD to SSD. If you only want to migrate Windows system to SSD, please read the following part.

Migrate OS to SSD

This feature is designed to migrate OS from HDD to SSD. And it offers two migration methods: one is to only copy the system required partitions. Another is to copy all partitions on the system disk to another disk and this way is equal to disk cloning.

Let's see how to use this feature to do OS migration.

Step 1: Run the best Kingston SSD migration software, and then click Migrate OS to SSD/HD from the above wizards in the toolbar.

Step 2: Then choose one migration method and here we choose B as an example. This can help you to only copy the system required partitions.

Step 3: Then you will enter an interface to select a disk as the destination disk. Please ensure no important data is saved on your SSD.

Step 4: Also, two copy options are provided by this Kingston SSD migration software, just choose one according to your requirement.

Kingston Acronis Key

Step 5: Then this Kingston SSD software will remind you to change BIOS setting if you want to boot your computer from SSD.

Step 6: Finally, execute this OS migration operation by hitting “Apply”.

Note: After finishing moving OS to SSD, someone may encounter a case: the computer fails to boot from SSD. How to solve this issue? Check this post - Cloned Drive Won't Boot How to Make Cloned Drive Bootable?

Now we have introduced you two cloning ways offered by MiniTool Partition Wizard - clone disk and OS migration from HDD to SSD. And if you like this Kingston SSD software, please share it with your friends.

Tips about Disk Cloning

After introducing how to clone disk and migrate OS from HDD to SSD, now let’s learn more information about the difference between copy & paste and clone disk.

When referring to disk cloning, some of you think it means to copy & paste all files of the hard drive.

As a matter of fact, a simple copy only transfers all files to another disk but not contains the file allocation table, master boot record, and more additional data.

Therefore, if you want to boot your computer from the new hard drive, you must fail.

Ssd

However, disk cloning can achieve this aim. Cloning means to copy all partition data from a disk to another disk by sector-by-sector mode.

Besides, data on the destination disk will be identical to the source drive. Thus, this ensures the integrality of data and your computer can boot from the destination disk.

So, disk cloning will be a good choice. Just choose a piece of professional Kingston solid-state drive software to migrate all data to SSD or move OS to SSD for a better performance or disk upgrade.

Conclusion

In this post, we show you why clone disk to Kingston SSD, two professional Kingston SSD clone software, how to clone disk/migrate OS from HDD to SSD and some tips of disk cloning.

If you want to clone a disk or do OS migration, please get the Kingston HDD to SSD software from the following button for a try.

Should you have any question or suggestion to this article or our Kingston clone software, welcome to contact us by leaving a comment in the text box below or sending an email via [email protected]. Much appreciated!

Kingston SSD Clone Software FAQ

The Kingston SSD doesn’t come with cloning software. If you need one, get MiniTool ShadowMaker or MiniTool Partition Wizard to have a try.
You can download MiniTool ShadowMaker or MiniTool Partition Wizard to easily clone your Kingston SSD. Just launch one hard drive cloning software, choose a cloning feature, and follow the on-screen instructions to finish the cloning.
MiniTool ShadowMaker and MiniTool Partition Wizard are the best SSD cloning software. You can get one of them to clone your SSD.
  1. Launch MiniTool ShadowMaker.
  2. Choose Clone Disk from Tools.
  3. Choose source disk and target disk.
  4. Start cloning your SSD.