Disk Drill Down

Posted on  by admin
Editor's Rating
Overall
Features
Price
Customer Service

Positives

I strongly recommend ncdu. For the university filesystem undergrads have quotas; since I discovered this a few years ago it's been the. Free Disk Drill can scan and recover data from virtually any storage device — including internal Macintosh hard drives, external hard drives, cameras, iPhones, iPads, iPods, Android devices, USB flash drives, Kindles, and memory cards. In many cases, Disk Drill can read your device even if it is failing, unreadable, or has lost a partition. “1v1 Game” The 1v1 game is one of my favorite games/drills within disc golf to improve your. If your hard disk fails, you can lose data or your entire system can fail. In this Daily Drill Down, Brien Posey gives you techniques for troubleshooting and repairing hard disk problems in Windows. Grass/grain drill vs no-till - posted in Machinery: Hey Guys, I need to be educated on drills. I keep seeing old grain drills that are set up as grass drills. JD 8000 series and IH 510 or 5100s. How much tillage is required to plant grass with this type of drill on medium packed dirt? We have about 30 acres of pasture and 30 of hayfield we want to be able to plant then overseed with mainly rye.

  • Simple, straightforward user interface
  • Multiple customizable scanning options
  • Additional Recovery Vault protection
  • Free recovery of 500MB data
  • One license for three devices
  • Various discount options

Negatives

  • Expensive base price
  • Pay-only lifetime upgrades
  • Limited customer support

When it comes to data recovery solutions, there is a clear pattern that this kind of software goes through: first comes the Windows version followed by the Mac equivalent. With Disk Drill, however, it was the other way around; while the Mac version dates back as far as 2011, Disk Drill wasn’t released for PC until 2015. Despite this, Disk Drill quickly became a market leader and is even now considered one of the best data recovery apps for very good reasons. Disk Drill’s simple and straightforward interface is one thing, but it’s a total powerhouse that crams in numerous impressive scanning and recovery functions. Disk Drill also comes with a clever Recovery Vault feature with which your most important folders receive extra protection against accidental deletion. And not only does Disk Drill have a free version – which even allows users to recover a limited amount of data – but its paid counterpart can be used on multiple computers for as long as you wish.

Features

At first the user interface of Disk Drill may seem too simple but, actually, it’s one of the main strengths of the software. So much so that despite the program coming with a short, built-in tutorial, it won’t be needed at all; Disk Drill for PC aids users in almost every aspect from the get-go.

For starters, each time the software is launched it automatically detects all drives and partitions, although in the case of the latter you will need to turn off a filter to see all elements properly. Disk Drill doesn’t waste users’ time by displaying unnecessary or rarely used functions either, instead the process is made very simple: choose between quick and deep scans or just hit the “Recover” button to start the default scanning method immediately.

Selecting Files for Scanning


Since Disk Drill focuses heavily on user-friendliness, there isn’t much available when it comes to additional settings, though more functions related to scanning and recovery are hidden behind the gear icon. This is also true for preferences, where it’s only possible to control whether the software should search for certain file types or all 286 of them at once.

Scanning

Without doubt, Disk Drill’s forte is scanning, and not just because it can be performed as many times as you want on virtually any kind of drive. The speed of initiating the scanning process on the selected drive or partition is made possible with the Recover button, but quite surprisingly Disk Drill chose to make deep scans the default setting. This may seem handy at first but since deep scans are typically very long, drawn-out processes, this could gravely slow down the recovery process for smaller drives and partitions. Thankfully, there is the option to perform quick scans from the drop-down menu, but note that this feature is only available for partitions. However, scans can be aborted, paused or saved and in fact before a scan is saved, Disk Drill properly alerts users to avoid saving it on the target drive to prevent any further data loss.

Disk

However, the actual scanning performance of Disk Drill’s PC version is quite exceptional. In our test, quick scan mode took less than 30 seconds to recall all 56 of the deleted files emptied from the Recycle Bin. Deep scan mode, on the other hand, also managed to locate the deleted files in their original location, too, albeit without their original file names.

Scan Results in Disk Drill


Data Recovery

There’s an effortlessness about Disk Drill for PC but nowhere is that more clear than with file recovery. For instance, search results can be filtered in various ways – file name, type, size, or modification date – to make finding certain items easier. The software comes with two preview modes, too: the regular one displays image files while hex preview mode reveals how damaged the file in question is. This way you’ll always be certain that the right files are recovered, because you should remember that there may be instances where Disk Drill won’t recover files with their names.

More annoying than that, however, is how the software always creates a certain number of folders and puts recovered files into them without any logic whatsoever – that is unless files were originally in a folder, because in this case the software always reconstructs the original folder structure.

The software’s attentiveness is also demonstrated in how – during the process of saving scans – the software properly warns users against saving files to the same drive that they were salvaged from. And in the case of Disk Drill Basic where users are limited to recovering 500MB of data for free, the recovery solution also records how much data has been and can be recovered before reaching the limit.

Filtering Results by File Type


Destination Folder Warning


Utilities

Although the number of utilities provided by Disk Drill for PC is quite limited, they are still worth talking about. Firstly, there is a button appropriately named “Extras” that hides the option to create an image file of a drive or partition, perfect for those who want to ensure they can recover their lost files without the fear of overwriting them. Then there is the option to perform a special kind of deep search, which is perfect for finding all partitions – lost or simply hidden – on a drive.

Still, the most interesting utility function by far is the Recovery Vault. Despite working for partitions only, when this feature is activated any folders within this vault gain added protection from Disk Drill. Simply put, when a folder featured in this vault is accidentally deleted, all you have to do is click on “Undelete protected data” in the drop-down menu next to the “Recover” button and that folder will be restored exactly as it was in an instant, no matter when it was deleted.

The Recovery Vault Feature


Pricing

Despite the lack of a free trial or a money-back guarantee, the deals offered by developer CleverFiles are actually quite fair. For starters, the free version Basic contains all available features without any limitations and even allows users to recover up to 500MB of data without upgrading. Unlimited recovery is only available in PRO, the default paid product of the company available for $89, but for this price one license can be used on three PCs.

Note that even though the license itself is for life, it’s only by adding lifetime upgrades for an extra $29 will you receive updates to the software beyond the version purchased. This is included alongside unlimited users and installations as part of Disk Drill Enterprise by default, but this version comes at a jaw-dropping $399 price.

$0
  • 1 user, 1 PC
  • Unlimited scans
  • Lost partition finder
  • Recovery Vault with advanced file protection
  • Recovery of 500MB of data
$89
  • 1 user, 3 PCs
  • Unlimited scans
  • Lost partition finder
  • Recovery Vault with advanced file protection
  • Unlimited recovery
  • +$29 lifetime upgrades
$399
  • Unlimited users and PCs
  • Unlimited scans
  • Lost partition finder
  • Recovery Vault with advanced file protection
  • Unlimited recovery
  • Free lifetime upgrades
  • Priority support

Thankfully, there are plenty of discount options offered by CleverFiles. Users can upgrade from an older version to the latest version of Disk Drill for 50% off, and this discount is available to those who want to use the software on a Mac, too. Disk Drill can also be had for half price if you decide to switch from a competing paid data recovery product, too.

Customer Support

Download

Unfortunately, the versatility of customer support provided for Disk Drill users is subpar, especially for those who opt for the software’s Windows version. For instance, the company’s help center – which serves as a blog, a knowledge base, and a coupons page – mostly focuses on Disk Drill for Mac. Granted, many of the articles describe general issues that could pop up in any version of the software, but newcomers might still assume that CleverFiles is neglecting Disk Drill for Windows users in favor of Mac enthusiasts. And the fact that the company’s YouTube channel is full of tutorials for Disk Drill for Mac only compounds the problem, too.

The Email Enquiry Form


Thankfully, however, Windows users aren’t actually neglected at all, since any user can contact live support via email, an inquiry form, or live chat. While these aren’t available 24/7, the company’s staff is prepared to answer any kind of question in a prompt and courteous manner.

Bottom Line

Disk Drill is often considered to be one of the best data recovery solutions and we can only confirm this. Although there are certain issues with the software – such as putting recovered files into random folders – these are dwarfed by everything else about the solution. Its scanning and recovery functions are impressive alone, and not just because of how effectively they do their jobs but their versatility, too.

And not only does Disk Drill come with clever features like the Recovery Vault, but all of its functions are created in such a way that even the least tech-savvy users can recover lost files with ease. With the added bonus of the fact that a paid license can also be used on multiple devices, it’s safe to say that Disk Drill for PC is a must-have for anyone looking for a simple and reliable data recovery solution.

Creating a PDF Compound Report With Drill Through Links

In this section:

How to:

Reference:

A common technique in business reportingis to create two related reports:

  • Summary Report. Contains condensedinformation for a category such as a business account, with summeddata such as total balances and total sales.
  • Detail Report. Forspecified fields in the associated summary report, a detail reportcontains all the component values that contributed to each summaryfield value.

Drill Through provides a way to easily relate the data in thesetwo types of reports. For example, a user scanning a summary reportaccount may see an unusual figure in one of the accounts, requiringexamination of the specific data behind that figure.

There are two forms of Compound Drill Through reports:

  • Legacy Drill Through Compound Reports. Thesereports use the legacy compound report syntax (PCHOLD with the OPENand CLOSE options) to create the compound report.
  • Drill Through Compound Layout Reports. Thesereports use Document Composer declarations to create the compoundprocedure and define which reports will be related through hyperlinks.

In both types of Compound Drill Through reports, the syntax forcreating hyperlinks between reports within the PDF file are exactlythe same.

UsingDrill Down, you can construct a summary report in which clickinga hyperlink displays detail data. A Drill Down is implemented dynamically.Clicking a hyperlink causes a new report to run. The detail reporttypically displays only the detail data for a selected field onthe summary report.

Incontrast, Drill Through reports are static. Drill Through createsa PDF document that contains the summary report plus the detailreport, with the detail report containing all the detail data fordesignated fields in the summary report. Clicking a Drill Throughhyperlink navigates internally in the PDF file. No additional reportsare run. You can save the PDF file to disk or distribute it usingReportCaster. When opened with Adobe Reader, it retains its fullDrill Through functionality.

DrillThrough provides flexibility in the appearance of reports and locationof hyperlinks:

  • Drill Through hyperlinks may appearin headings and subheadings, as well as, in rows of data.
  • You can formatthe reports using a WebFOCUS StyleSheet.
  • You can indicatea hyperlink by color, font, underlining, and so forth.
  • You can mixconventional Drill Down hyperlinks freely in the same report withDrill Through hyperlinks.
  • The PDF filecreated with Drill Through can consist of more than two reports.

You can use Drill Through with otherWebFOCUS features:

  • Compound reports that contain linkedDrill Through reports may also contain unrelated reports, beforeor after the Drill Through reports. For example, you can add to thecompound report package a PDF report that contains embedded graphs.
  • You can addDrill Down and URL hyperlinks to a PDF report that contains Drill Throughhyperlinks.
  • Since DrillThrough reports are standard PDF compound reports packaged intoa single PDF file, you can distribute them using ReportCaster.
  • Reports withDRILLTHROUGH syntax can be rendered in all other styled output formats:HTML, PostScript, EXL2K, and so on. In these other formats, the DRILLTHROUGHsyntax is ignored. It is useful, for example, to generate a PostScript versionof a Drill Through report, which is formatted identically to thePDF version, but which you can send directly to a PostScript printerusing ReportCaster or operating system commands.
  • Drill Throughautomates the process of navigating quickly and easily from general tospecific information in related reports packaged in a single PDFcompound report. Drill Through syntax sets up hyperlinks that takeyou from an item in a summary report to a corresponding item ina detail report.

Disk Drill Download Windows Free

Procedure: How to Create a Drill Through in a PDF Compound Layout Report

To create a Drill Through in a PDF CompoundLayout report:

  1. Createthe summary report with a DRILLTHROUGH hyperlink.
  2. Createthe detail report with sort values that match the hyperlink field values.
  3. Createthe Compound Layout report with page layouts for each componentreport, and define a DRILLMAP attribute within the calling reportto specify the targets of the drill through hyperlinks.
Procedure: How to Create a Drill Through in a PDF Compound Report

To create a Drill Through in a PDF CompoundReport:

  1. Create the summary report.
  2. Create the detail report.
  3. Connect the reports with hyperlinks.
  4. Merge the summary and detail reports into a PDF compound report.

where:

type
Is one of the following StyleSheet types:
  • DATA
  • HEADING
  • FOOTING
  • SUBHEAD
  • SUBFOOT
  • SUBTOTAL
  • RECAP
element
Is one or more identifying elements allowed in a WebFOCUS StyleSheetand Drill Through report. An element can describe a specific column(for example, COLUMN=PRODUCT) or heading item (for example, LINE=2,OBJECT=field, ITEM=3).
styling_attributes
Optionally specify the appearance of the hyperlink (for example,COLOR=RED, STYLE=BOLD).
DOWN
Links to the next (the following) report.
FIRST
Links to the first Drill Through report in the sequence.
link_fields
Specifies blank-delimited link field pairs with the followingformat:
T1=S1 T2=S2 T3=S3...
T1, T2, and T3 represent column references in the target (linked)report, and S1, S2, and S3 represent column references in the source(current) report. There may be more than three pairs.

A columnreference can be the name of a field or any of the other symbolsvalid in WebFOCUS StyleSheets syntax (for example, Bn, Cn, Pn, Nn,An, subscripted field name, and so on).

The order of thesyntax is similar to Drill Down syntax, in which the parameter pairs specifythe column reference in the current (source) report on the rightand the name of the Dialogue Manager variable in the Drill Down(target) procedure on the left.

Disk Drill Download Windows

If the column reference inthe target report is identical to the column reference in the sourcereport, you can use a single column reference, for example, COUNTRY insteadof COUNTRY=COUNTRY.

Thefollowing StyleSheet declaration places a hyperlink on the PRODUCTfield on each DATA line, specifies that the fields to link to thenext report are CATEGORY and PRODUCT, specifies the action DOWN,so that clicking a hyperlink brings you to the location in the next reportthat has the corresponding values of the two link fields, and usesthe default appearance for the hyperlinks, which is blue, underlinedtext. Since the target fields in the detail report have identicalnames in the summary report, you can use the notation CATEGORY ratherthan CATEGORY=CATEGORY.

Syntax: How to Specify Which Compound Layout Reports Will be Related Through Hyperlinks

The target report is specified in theDRILLMAP attribute of the COMPONENT declaration for the callingreport.

where:

L1
Is the link identifier.
targetreport
Is the component name of hyperlink destination.

Note: Thedouble parentheses around the DRILLMAP values are required.

Example: Sample Component Declarations With DRILLMAP Attributes

Disk Drill Download Iphone Recovery

The following COMPONENT declarationfor REPORT1 specifies a DRILLMAP attribute that points to REPORT2:

The following COMPONENT declarationfor REPORT2 specifies a DRILLMAP attribute that points to REPORT1:

  • Only oneDrill Through behavior can be specified per report.
  • The fieldspecified to contain a Drill Through behavior must also be presentin the target report.
  • The originatingreport containing the Drill Through link must be rendered (by the ReportingServer) prior to the target report. The order of reports must behandled by the user.
  • Live DrillThrough links are only generated for PDF output. Reports with DRILLTHROUGHsyntax can be rendered in all other styled output formats: HTML, PostScript,EXL2K, and so on. In these other formats, the DRILLTHROUGH syntaxis ignored. It is useful, for example, to generate a PostScriptversion of a Drill Through report, which is formatted identicallyto the PDF version, but which you can send directly to a PostScriptprinter using ReportCaster or operating system commands.
  • Drill Throughis only supported for reports (TABLE).

Reference:

The following examples illustrate how to use Drill Throughsyntax to create a compound report with a summary and detail reportand navigate between them.

The following syntax generates a samplesummary report:

The output is:

The following syntax generates a sampledetail report:

The firstpage of the output is:

Example: Connecting the Reports With Hyperlinks (Step 3)

The example illustrates the following:

  • When you place a Drill Through hyperlinkon a sort-break element, ensure the sort-break is at least at thelevel of the last sort field participating in the Drill Through. Forexample, in the second report, the Drill Through hyperlink is onthe subfooting associated with PRODUCT rather than the heading (witha sort break) associated with CATEGORY.

    Although the code can infera value of PRODUCT for the CATEGORY heading (you can verify thisby embedding the field <PRODUCT> in the heading), it is alwaysthe value of the first PRODUCT within that CATEGORY. Typically youwant a Drill Through hyperlink for each value of PRODUCT withineach CATEGORY.

    You do not need to place the hyperlink on anembedded item. You can just as effectively place it on a text item.Any item in the subfooting is associated with the same values ofCATEGORY and PRODUCT. Similarly, you can place a hyperlink on anyfield in a DATA line, and the values of the associated link fieldswill be identical. Conventional Drill Down hyperlinks also workthis way.

The summary report:

  • Places a hyperlinkon the PRODUCT field on each DATA line.
  • Specifies thatthe fields to link to the next report are CATEGORY and PRODUCT. Sincethe target fields in the detail report have identical names in thesummary report, you can use the notation CATEGORY rather than CATEGORY=CATEGORY.
  • Specifies theaction DOWN, so that clicking a hyperlink brings you to the location inthe next report that has the corresponding values of the two linkfields.
  • Uses the defaultappearance for the hyperlinks, which is blue, underlined text.

The summary report is:

The detail report:

  • Places a hyperlink in the subfootingassociated with the link field PRODUCT. Since CATEGORY is a higherlevel BY field than PRODUCT, each PRODUCT subheading is also associatedwith a unique value of CATEGORY.
  • Places a hyperlinkon the first item of the second line of the subfooting, which is thetext Return to Summary.
  • Specifies actionFIRST, so that clicking the hyperlink jumps to the line in the first (summary)report that contains the same values of the two link fields CATEGORYand PRODUCT.
  • Uses the COLORattribute to display the hyperlink as red, underlined text.

The detail report is:

The next step is the only step that is differentfor creating a Compound Layout report or a legacy Compound Report.

Example: Creating the Compound Layout Report (Step 4)

Performthis version of Step 4 if you are creating a Compound Layout report.

To create the Compound Layout report:

  • Add a COMPOUNDLAYOUT and SECTION declaration to the top of the procedure.
  • Add PAGELAYOUTand COMPONENT declarations for the two reports. Add DRILLMAP attributesto the COMPONENT declarations.
  • Add SET COMPONENTcommands and the two reports.
  • End the procedure with a COMPOUND ENDcommand:
Example: Merging Summary and Detail Reports Into a PDF Compound Report (Step 4)

Performthis version of Step 4 if you are creating a legacy compound report.

Disk Drill Download

The next step is to combine the reportsinto a single PDF Compound Report. You can:

  • Code the OPENand CLOSE options on the [PC]HOLD FORMAT PDF command.
  • Code the OPENand CLOSE options on the SET COMPOUND command before the componentreport syntax.

Drill Through does not support the NOBREAKoption, which displays compound reports without intervening pagebreaks.

This example uses the OPENand CLOSE options on the PCHOLD FORMAT PDF command:

Example: Run the Drill Through Report (Step 5)

Run the compound report. The first pageof output has the summary report with the hyperlinks to the individualproducts in blue and underlined:

Click the hyperlink Croissant forthe category Food. You jump to that detailinformation. In the detail report, the hyperlink back to the summaryreport is in red and underlined:

Clickthe hyperlink Return to Summary to returnto the first page (summary report).

The followingguidelines apply:

  • The set of link fields used with FIRSTmust correspond to the set of link fields used with DOWN on thefirst report.
  • The action of a FIRST hyperlink in thelast report should return to the corresponding line in the firstreport. The chosen set of links must uniquely identify that lineof the first report.
  • The DOWN hyperlink on the line of thefirst report must uniquely identify that line of the first reportto locate the matching line of the detail report. The set of linksfor the DOWN in the first report and the FIRST link in the lastreport are the same, since they both must uniquely identify a linein the first report.

Reports linked with Drill Through mustfollow certain rules to ensure that the hyperlinks between themwork correctly. The following are key concepts:

  • Source report. Thereport from which you are linking. The source report contains hyperlinksto the target report.
  • Target report. Thereport to which you are linking.
  • Link field. Oneof a set of corresponding fields of the same data type that existin both the source and target reports. Link fields locate the positionin the target report to which a hyperlink in the source report jumps.

Sourceand target terminology refer to each pair of linked reports. Forexample, if there are three reports linked with Drill Through, thesecond report is generally the target report of the first report,and also the source report of the third report.

To processa report as a Drill Through, you must identify the link fields inthe source report that relate to the target report:

  • Choose meaningfullink fields whose values match in the source and target reports.For example, if a field in the source report contains a part numberand a field in the target report contains a Social Security number,the field values will not match and you cannot construct hyperlinks.
  • Specify as manylink fields as necessary to uniquely locate the position in thetarget report that corresponds to the link fields in the sourcereport. For example, if the source report is sorted by STATE andCITY, specifying CITY alone as the link field will be problematicif different states contain a city with the same name.
  • The link fields in the source and targetreports must have the same internal (actual) format: the stoppeddata type and internal length must be identical. Formatting options, suchas number of displayed digits and comma suppression, may differ.For example, an A20 field must link to another A20 field. However,an I6C field may link to an I8 field, since internally both arefour-byte fields.
  • The link fields must be sort fieldsor verb objects in both the source and target reports. You can includea NOPRINT (non-display) field, which is useful when constructinga report in which a field is in embedded in heading text.
  • Designing Drill Through reports is verysimilar to designing Drill Down reports. Choosing the link fieldsfor a Drill Through report is similar to choosing the parameter fieldsin a Drill Down report. Likewise, the syntax of a Drill Throughclosely parallels the syntax of a Drill Down.
  • Since DrillThrough reports are linked by corresponding values of link fields,the hyperlinks must appear on report elements associated with aparticular value of a link field. However, hyperlinks do not haveto appear on any link itself.
  • Not all linetypes are appropriate for placement of a Drill Through hyperlink.For example, if a page break occurs on a BY field that is also aDrill Through link, each page heading is clearly associated witha value in that field. However, if a page break occurs because ofpage overflow, avoid placing a Drill Through link in a heading.Similarly, subheadings, subfootings, subtotals, and recaps are associatedonly with the values of particular BY fields.
WebFOCUS